Bridgeport Accessories at Discount Prices!

CALL 847-888-0797 for price and availability on replacement parts and accessories.

Return to STK Homepage

"TWIN-GRIP" QUILL-FEED SPEED HANDLE

Eliminate the need to pull off and rest the quill feed handle for repositioning. A simple turn of the hand will retract the pins from the index plate of the quill feed mechanism and lets the operator move the handle back into any desired position. The spring loaded pins actuate the quill feed up or down.

• Replace standard feed handle withing seconds
• No hole to be drilled
• Rugged all steel construction
• Five Year Warranty

[Return to Top]

LEFTY-FEED HANDLE KIT

This kit is ideal for left-handed and right-handed mill operators. You can now enjoy the freedom and comfort of an additional quill feed handle. The Lefty Feed Mechanism will accept any standard quill feed handle including Quill Feed Speed handle.

Handles are interchangeable with either side of the quill housing. You can use two handles simultaneously or individually, allowing greater handling control, leverage, and flexibility.

The "Twin-Grip" Quill Feed handle shown is additional and not included in the kit.

STK Part No. - 038-0045
[Return to Top]

SPEEDY POWER DRAWBAR For Variable Speed and Step Pulley Type Milling Machines

• Four second tool change
• Easy installation and operation, no special tools needed
• Push button control
• Uses standard shop air supply
• STK Part No. - 1038
• Eliminates excessive downtime
• Increases productivity
• Ends collet sticking
• No special collets or tool holders needed
• Provides uniform tightening of collets
• Limited Warranty

When ordering please specify make and model of machine R-8, 30, or 40 taper collet

[Return to Top]

TWO-LIFE DRAWBAR

• Two drawbars in one
• Back-up advantage
• Prevents excessive downtime
• Longer hex head
• Extended thread length
• Black oxide coated
• To obtain "second life" after the end wears out, cut off at "V" notch and remove large spacer

[Return to Top]

HIGH EFFICIENCY HALOGEN WORK LIGHT

Focus more closely on your work piece and reduce the chance for error, with this high intensity work lamp.

Features:

• Brilliant, "natural" white light illumination
• Compact lamp head for unobstructed view of work area
• Rugged stay-put goosenecks
• .540" dia. covered with PVC sleeve, 27" long
• 20w long-life halogen bulb
• On/Off switch
• Lamp housing, 2-1/2" dia x 2-1/8" length
• Swivel mount attaches to existing bolt hole located on the turret.
• Color, black

STK Part No. - 038-0052
[Return to Top]

SPIDER VISE HANDLE

• Replaces stock "swing" handles furnished with vises
• Increases speed and accuracy of clamping operation
• eliminates damage to machine ways. . .handle does not overhang
• Fits most popular vises
• Rugged all steel construction

STK Part No. - 037-0261
[Return to Top]

SPIDER HANDLE

• Replaces conventional handle in seconds
• Particularly suitable for drilling
• Rugged all steel construction

STK Part No. - 037-0268
[Return to Top]

PRECISION MACHINE VISE

• Each pound of force in horizontal induces one-half pound of downward force, thus eliminating jaw tilt
• Vise bed is casted from 80,000 pound ductile iron which resists deflection bending
• The sliding surface of the vise bed is flame hardened and ground
• Lead screw is enclosed for maximum protection
• Swivel base is graduated to 360 degrees
• Needed bearing thrust collar
• All vises are matched within .002 (jaw ht.)
• One year warranty

STK Part No. - 038-0200
[Return to Top]

STEP-SAVER The 3/4 Hex Drawbar Wrench

• Step-Saver carries a Lifetime Limited Warranty
• Replaceable brass tip
• Wrench is constructed of 4140 steel for a lifetime of use
• Properly balanced for everyday use

STK Part No. - 038-0035
[Return to Top]

EDUCATED NUT

Adjust your quill depth in seconds with our depth stop nut.

• The push button releases the nut for repositioning .001" micrometer adjustments by rotating the nut
• Easy installation - fits domestic or imported mills with 1/2"-20 threaded stop rod

STK Part No. - 1053
[Return to Top]

"QUICK-STEP" WORK STOP

A versatile work stop that virtually eliminates set-up time!

Allows fast, accurate positioning on repetitive work. No need for blocks, clamps, shims, etc.

Calibrated threaded rod holds position securely, for locating your work from slots, holes, shoulders, etc.

It is very suitable for multiple set-ups on milling machines, drill presses, boring mills, etc., and is ideal for tool making as well.

STK Part No. - 1048 - V
STK Part No. - 1048-T
[Return to Top]

R/8 COLLET TRAY

• This convenient tool tray will cut down set-up and tool changing time.
• Made from sturdy aluminum - won't scratch collets.
• Easy to install. Only a few minutes are required to drill and tap two 1/4" holes into the base casting 1" below the degree ring.
• Holds 13 R/8 collets and mounts on vertical knee-type milling machines.

STK Part No. - 1130
[Return to Top]

5/C COLLET TRAY

The 5C Collet Tray has been specially designed to adapt easily to any place in your shop. It may be hung on the wall or machine or set on a shelf or workbench.

STK Part No. - 1136
[Return to Top]

CLAMPING KIT

6 T-slot nuts	6 flanged nuts
4 couplers	6 high blocks
6 clamps	24 studs

STK Part No. - 1131
[Return to Top]

A hand-held, battery operated reference directory containing 80% of the most commonly used materials in general machining. These materials are referenced to the recommended surface foot machinability and operations being performed.

STK Part No. 044-0075
[Return to Top]

THE ORGANIZER

The most efficient accessory that organizes a complete tooling system including clamping kit, collets, chuck, and arbor. It reduces the possibility of tools being lost or damaged. It is designed to achieve maximum accessibility allowing quicker set-ups, tool changing, and clean-up time. The tray has a full 180 degree pivoting arm with 360 degree rotating tray and can be easily installed in the existing bolt hole. There are three models available and the standard tray.

[Return to Top]

"E-Z SWITCH"

• Allows operator to turn motor on/off within an easier reach
• Easy and safe to operate
• Easy to mount
• Durable, made from steel

STK Part No. - 1034
[Return to Top]

All types of precision tooling available. Call for details.

• R8 Collets
• Collet Chuck
• Stub Mill Holders
• R8 Tooling
• 5C Collets

[Return to Top]

OBERG SAFETY CURTAIN

Protect people, plant, and products flying chips, grit & cutting fluids, etc.

This clear plastic, heavy duty safety curtain is attached to a circular frame and is mounted on a swiveling bracket that allows it to protect any adjacent area from flying chips, grit, cutting fluids, etc. Model M1, 5' x 12' is designed to fit milling machines. Models for other machine tools are available.

The 14 mil thick vinyl curtain is colorless, meets California Fire Marshal requirements and contains ultraviolet inhibitors to prevent cracking and crazing. All models come complete with all the necessary hardware and instructions for easy assembly.

STK Part No. - 1705
[Return to Top]

LUBE USA CENTRALIZED LUBRICATION SYSTEM Complete System

MANUAL SYSTEMS
They are ideally suited for machinery which can be lubricated by a hand actuated, intermittently fed oil discharge system on an occasional basis. Manual piston pumps available are shown from left to right (top picture), LP-5, L-8R, L-3, L-20, and L-5.

AUTOMATIC SYSTEMS
They are installed on machinery requiring an uninterrupted discharge of oil, either regularly timed or continuous. Automatic systems are actuated by a self-contained timing mechanism or by a mechanical drive mechanism connected to the equipment being lubricated. Automatic piston pumps available are shown from left to right (bottom picture), MLZ, MMS-II, and MMXL-III.
[Return to Top]

BIJUR LUBRICATION SYSTEM

• 1 Liter Capacity
• Parts/Service
• Manual Lubricator L5P
  STK Part No. - 1707

• Bijur K1099 9-Point Manual Lubrication System
  STK Part No. - 1708

[Return to Top]

MISTIC-MIST SPRAY MIST SYSTEMS

Comes with Special Nozzle Holder

• All metal construction
• Adjustable air and liquid controller for each outlet
• Coolant level indicator
• Stainless steel nozzle
• Built in liquid filter
• Easily mounts to your milling machine
• One gallon of coolant can last up to 14 hours
• Free sample of MISTIC-MIST concentrate (non-hazardous)

STK Part No. - 1711
[Return to Top]

CHIP AND OIL COLLECTOR

• Basic Collector Pan - STK Part No - 038-0056
• Riser (3 pieces) - STK Part No. - 038-0057
• Coolant Pump - STK Part No. - 038-0058
• 2 Gallon Cap. Coolant Unit - STK Part No. - 038-0059

PROTECTIVE WAY COVERS

Control and prevent damage to your milling machine from tools, work pieces and metal chips lying on the bed. The Way covers also act as a wiper for the front and rear knee of the milling machine. There are 4 pieces (1 set) of durable 1/16" thick rubber that can be easily adjusted while operating and are attached with T-nuts that are supplied. No drilling required.

Accessory Package
Entire 4 pc. set w/mounting hardware, complete
STK Part No. - 1022

Separate Pieces
Upper column and rear knee protector w/mounting hardware.
STK Part No. - 1023

Front Knee Way Protector
STK Part No. - 1024

Table Bed Covers
One pair of covers w/mounting hardware.
STK Part No. - 1025
[Return to Top]

GORTITE WAY COVERS

• Completely Enclose Ways
• Complete with All Mounting Hardware
• Easy to Install; mounting instructions furnished
• Fits all standard Bridgeports including those with optical or measuring attachments
• Gortite way protectors are bellows-type covers made of .033" thick hypalon-coated fabric
• In most cases, existing screws are used to mount the protectors. All brackets and mounting bolts are furnished.

STK Part No. - 037-0333, Series I
STK Part No. - 037-0334, Series II
[Return to Top]

MEYER STEEL PLUG GAGES

Metric sizes are available.

Library Series

*Consists of 2 four drawer cabinets with one drawer empty for storage of handles, bushings, etc.

IMPORTANT: Specify plus or minus tolerance when ordering gages.

[Return to Top]

RISER BLOCK

Obtain additional clearance for very large workpieces. Bolts are additional.

[Return to Top]

WAY WIPER KIT

Keeping new felt wipers on your machine will keep your Ways like new for years.

Kit contains:

• 4 Saddle wipers
• 2 Knee wipers

STK Part No. - 1601
[Return to Top]

FAGOR PROKIT

• Saves set-up time on tool changes when worn out or broken
• Performs precise machining with table sag compensation
• Calculates the part center without requiring special accessories
• Operates with Absolute as well as with Incremental (Floating Zero) coordinates
• Easy to install and use
• Offers the DISPLAY-OFF mode, which keeps track of axes position while the display is off
• Eliminates math calculations

[Return to Top]

PRELOADED BALL SCREWS

• High-capacity, long-life
• Precision-rolled ball screws
• Precision Ground Screws available upon request
• Preloaded ball nuts
• Brush-type wipers
• Easy-access lubrication
• High-strength housing
• Easy installation
• Kits available for any table size (manual or power feed)
• Kits also available for other mills

STK Part No.
037-0042 - 42" Ball Screw Kit
037-0042PF - 42" Powerfeed Screw Kit
037-0737 - 48" Ball Screw Kit
037-0738 - 48" Powerfeed Ball Screw Kit

[Return to Top]

REPAIR KIT for 1-1/2 and 2 HP Variable Speed Type Milling Machines

This kit will save you money!

Kit Contains:

• 2 Inserts and key for motor disc
• 2 Inserts and key for spindle disc
• 2 Packs of glue
• 2 Gage pins for gluing in inserts
• 1 Snap ring for motor disc
• 1 Sand paper

1-1/2 HP Repair Kit - STK Part. No. - 1037-15
2 HP Repair Kit - STK Part No. - 1036-20
[Return to Top]

SERVO POWER SCREWS

• Type 150 has stable speed control at lower speeds for best cutting tool life
• Type 140 is an outstanding all-round workhorse
• Both are warranted by manufacturer for one year
• Kits are available: Safety Handle Kit, Shaft Extension Kit, Limit Switch Kit
• SERVICE AND PARTS AVAILABLE
• Servo available for most machines

Type 140 gives you reliable workhorse performance across a wide range of general purpose machining. Choose type 150 when you need more stable speed control at lower speeds for the finest surface finish.

All Servo feeds include limit switches, manual circuit breaker, 8' ground line card, complete instructions, and mounting hardware.

SERVO TYPE 140
140 lb-in Torque Peak
90 lb-in Continuous Duty
105 lb-in at 75% Duty Cycle or 15 minutes Continuous

SERVO TYPE 150
150 lb-in Torque Peak
105 lb-in Continuous Duty
130 lb-in at 75% Duty Cycle or 15 minutes Continuous

[Return to Top]